PRODUCTS
- Vibration related products
- Vibration monitoring meter / Axis displacement meter
Vibration Monitoring System
CM-393
CM-393 is a system to monitor vibration of machinery, etc., and it can quickly detect abnormal vibration condition and provide alarm signal.
It is ideal for continuous vibration monitoring at power plants or production facilities.
Either of 2 measurement modes, acceleration or displacement, can be easily selected on the front panel.
It is possible to set alarm trigger level at any desired displacement between 10 to 990μp-p(at 10μp-p step). Also, alarm delay time is available for up to 30sec to prevent false alarming.
| Type | CM-393 | |
|---|---|---|
| Number of channel | Independent unit for each channel | |
| Input Impedance | Approx.100kΩ | |
| Measurement Mode | Acceleration, Displacement | |
| Measurement Range | Acceleration | 1～100mm/s² (0.1～10G) |
| Displacement | 1～1000μp-p | |
| Measurement Sensitivity | 20mV/m/s² (200mV/G) | |
| Frequency Response | Acceleration | 5Hz～1kHz |
| Displacement | 10Hz～200Hz | |
| Filter | High-pass | Cut-off Frequency 5Hz -12dB/oct |
| Low-pass | Cut-off Frequency 200Hz -12dB/oct Cut-off Frequency 1kHz -12dB/oct |
|
| Accuracy | Within ±5% of full-scale range. | |
| Indicator | 0～10, 0～5(Resolution 2%) Analog 50 division scale mark. | |
| Output | Signal for level recorder | Voltage；DC4～20mA/full-scale Terminal；Terminal block on the back panel(M4) |
| Waveform signal | Voltage；0～2Vp-p/full-scale Terminal；BNC connector on the front panel Terminal block on the back panel(M4) |
|
| Alarm for large vibration. | Setting | Digital thumbwheel switch on the front panel. Alarm and Trip are individually set. |
| Level | Displacement ALARM；10～990μp-p (at 10μp-p step) TRIP；10～990μp-p (at 10μp-p step) |
|
| Deactivation | Automatic | |
| Output | Independent outputs for Alarm and Trip. Contacts；Terminal block on the back panel(M4) Capacity(max) AC250V 3A(5A), load resistance(cosφ=1) |
|
| Delay | Selectable at desired delay time between 3～30sec. (can be set under the system) |
|
| Power Source | Input | AC 100V±10% 60Hz |
| Output | DC+24V 1mA constant current, to the built-in acceleration pick-up from the terminal block on the back panel. | |
| Power Consumption | Approx.100VA | |
| Operating Temperature | 0～45℃ | |
| Storage Temperature/ Relative Humidity | -10～55℃、10～60%(RH) | |
| Size | 190(W)×200(H)×470(D) | |
| Type | TYPE 7828 |
|---|---|
| Construction | Piezo, shear type |
| Sensitivity | 100mV/m/s² (980mV/G) |
| Frequency Response | 5Hz～2kHz±3dB |
| Resonant Frequency | 8kHz |
| Maximum Acceleration | 40m/s² (4G) |
| Maximum Lateral Sensitivity | 5% |
| Shock | 3,000m/s² |
| Operating Temperature | -20℃～+110℃ |
| Power Source | 24VDC |
| Current | 0.5～5.0mA |
| Output Impedance | Less than 50Ω |
| Connector | Miniature connector on the side |
| Cable | BC-0064 |
| Case Material | SUS303 |
| Size(less connector) | 35(Hex)×29(H) |
| Weight | 270g |
| Mounting Screw | M6 screw |
| Vibration Monitoring System | CM-393 | 2ea |
|---|---|---|
| Storage Case (to put 2 systems) | CM-393/2 | 1ea |
| Acceleration Pick-Up with built-in amplifier | TYPE 7828 | 2ea |
| Pick-Up Cable | BC-0064 | 2ea |
| Pick-up cover | F－519/2 | 1ea |
