PRODUCTS
- Microphone
- Preamplifier integrated microphone
Preamplifier integrated microphone
TYPE 4158N
(TYPE 1)
Preamplifier integrated microphone compatible with IEPE can be connected directly to FFT analyzer or other analyzers, enabling to measure with highly accurate resolution at low costs.
Long-term stability realized by accelerated aging process under 360℃ enables to use under 100℃ or higher.
Condenser microphone is to be used for measurements of sound presser level with high resolution over wide frequency range.
Varieties of microphone diaphragm diameter 1,1/2, 1/4, 1/6, 1/8 inch and corresponding frequency characteristics would best support measurements of various purposes.
Type | TYPE 4160N(TYPE2) |
---|---|
Appearance *When the image is clicked, it is displayed by the zoon. | |
Frequency Response Characteristic | Array |
Nominal Diameter | 1/4 inch |
Release voltage | -41dB(8.9mV/Pa) |
Pressure Sensitivity (Included preamplifier) | -44dB(6.3mV/Pa) |
Polarization voltage | 0V |
Frequency Characteristics | 20Hz~20kHz |
Maximum sound pressure level | 130dB |
Self-noise level | 33dB(A) |
Temperature coefficient | 0.02dB/℃ or less |
Power supply and voltage | DC15~28V |
Constant current | 0.5~4mA |
Output Impedance | Approx.100Ω |
Connector | SMB connector |
TEDS | compliant / noncompliant |
Operating Temperature・ Range of Humidity | -10℃~+50℃・90%RH (no condensation) |
Storage Temperature・ Range of Humidity | 40% or less (at room temperature) |
Cable | SMB-BNC Cable (3m) |
Outline size | Φ7×50 |
Weight | 6g |