PRODUCTS
- Microphone
- Measurement condenser microphone
Measurement condenser microphone
TYPE 7116
(TYPE 1)
Preamplifier integrated microphone compatible with IEPE can be connected directly to FFT analyzer or other analyzers, enabling to measure with highly accurate resolution at low costs.
Long-term stability realized by accelerated aging process under 360℃ enables to use under 100℃ or higher.
Condenser microphone is to be used for measurements of sound presser level with high resolution over wide frequency range.
Varieties of microphone diaphragm diameter 1,1/2, 1/4, 1/6, 1/8 inch and corresponding frequency characteristics would best support measurements of various purposes.
 |
| Type | TYPE 7118(TYPE1) |
|---|---|
| Appearance ※When the image is clicked, it is displayed by the zoon. |  |
| Frequency Response Characteristic | Pressure-Field |
| Nominal Diameter | 1/8 inch |
| Release voltage | -72dB (0.25mV/Pa) |
| Polarization voltage | 200V |
| Frequency Characteristics | 20Hz～200kHz |
| Maximum sound pressure level | 170dB |
| Self-noise level | 65dB(A) |
| Temperature coefficient | 0.007dB/℃ or less |
| Preamplifier Type | TYPE4116 |
| Operating Temperature・ Range of Humidity | -10℃～+50℃・90%RH (no condensation) |
| Storage Temperature・ Range of Humidity | 40% or less (at room temperature) |
| Outline size | Φ3.5×6.65 |
| Weight | 0.3g |
| Type | TYPE 7013(TYPE1) |
|---|---|
| Appearance ※When the image is clicked, it is displayed by the zoon. |  |
| Frequency Response Characteristic | Pressure-Field |
| Nominal Diameter | 1/2 inch |
| Release voltage | -38dB (12.5mV/Pa) |
| Polarization voltage | 200V |
| Frequency Characteristics | 10Hz～20kHz |
| Maximum sound pressure level | 160dB |
| Self-noise level | 21dB(A) |
| Temperature coefficient | 0.007dB/℃ or less |
| Preamplifier Type | TYPE4012 |
| Operating Temperature・ Range of Humidity | -10℃～+50℃・90%RH (no condensation) |
| Storage Temperature・ Range of Humidity | 40% or less (at room temperature) |
| Outline size | Φ13.2×12.6 |
| Weight | 6.0g |
